Intrusion Alarm System
The oldest form of security system – commonly known as Burglar Alarm – CCTV and Door Access were rarely heard of then. Needless to say, the early security systems installed by us then in 1979 were Burglar Alarm.
It is typically consisted of a control panel, door/window contact, motion detector, panic button, siren/strode and arm/disarm keypad. Violation is detected via opening of doors or windows or triggering of motion detector. When system is ON or ARM, the control panel will activate connected loud siren/strode device and send a PUSH NOTIFICATION or SMS Alert to selected persons.
For high security sites like bank, jewellery and utilities, the system needs to be monitored by Central Monitoring Station (CMS). The CMS Operator will inform key-holders (contact person for alarm activation) and the Police of alarm activation for necessary response.
Most intrusion alarm system now offer some form of automation control and function like turning on/off lights when motion is detected, garage shutter, etcs. Ace offer system that can integrate with KNX system.
Ace Electronic use SATEL products for Intrusion Alarm and is the exclusive distributor in Singapore since 2016.
Ace Electronic offer a full suite of systems to cater to all requirement ranging from INTEGRA panel for big premises to VERSA panel for medium size system and PERFECTA panel for smaller size system.
Integra 128 Plus 16/128 zones PCB
Integra 64 Plus
16/64 zones PCB
8/32 zones PCB
8 zones expander
8 outputs expander
Keypad with Card Reader
Touch Sensor Keypad
Touch Screen Control
Versa Plus LTE
5/30 zones TCP/IP LTE panel
Versa LCD Keypad
Versa LCDM /KWRL2 Keypad
VERSA control panels are specially designed to for medium-size installations in apartments and small houses, as well as in small offices and commercial buildings.
The VERSA control panels can interface with devices connected to the system in a conventional manner (i.e. using a cable), as well as with those which use remote or radio communication. Such a solution makes it possible to create exactly the system that is needed in the protected building: wired or wireless, or a hybrid one, that combines the properties of wired and wireless systems. In addition, the VERSA series control panels can work using different arming modes, which enables operation of the system devices to be customized to the needs and demands of the system users.
VERSA use Ethm or GSM-GRPS module for Internet connection and for remote.
Touch Screen Keypad
Perfecta 32-WRL-LTE 8/32 zones Panel with wireless controller
PRF LCD/WRL Keypad Control, KEYFOB Control & PERFECTA CONTROL
Perfecta IP-32 8/32 zones TCP/IP panel
INT-RX-5 Keyfob Receiver
Design of the PERFECTA control panel allows you to build a wired or wireless system, offering all the functionality needed in small and medium-sized buildings. Both zone expanders and output expanders can be connected to the control panel, thus increasing the number of supported devices. It is a simple and reliable way for a quick expansion of the system.
Simple configuration, intuitive operation and easy control – these features characterize an alarm system based on the PERFECTA control panels. PERFECTA 32-IP/LTE WRL, is design makes it possible to create a wireless or hybrid installation.
PERFECTA use IP or GSM/GPRS connection for remote
monitoring and control.